BLGRT - RHOPLEX E-330 EMULSION 66580

  • MSDS: BLGRT
  • Manufacturer: ROHM AND HAAS CO
  • Product Name: RHOPLEX E-330 EMULSION 66580
  • National Stock Number: 8040-00N019485
Product Identification

Product ID:RHOPLEX E-330 EMULSION 66580
MSDS Date:05/26/1989
FSC:8040
NIIN:00N019485
MSDS Number: BLGRT

Responsible Party
ROHM AND HAAS CO
INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19105
US

Emergency Phone: 215-592-3000 800-424-9300(CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

Contractor
ROHM AND HAAS CO
PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

Ingredients

ACRYLIC POLYMER

Fraction By Weight: 46-48%


RESIDUAL MONOMERS; (INDIVUDIAL RESIDUAL MONOMERS)

Fraction By Weight: <0.1%


AMMONIA (SARA III)

CAS: 7664-41-7

RTECS: BO0875000

Fraction By Weight: 0.2% MAX

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM/35 STEL; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 52-54%

Hazards

LD50 LC50 Mixture:LD50:(ORAL RAT) >5 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:VAPOR OR MIST CAN CAUSE
HEADACHE, NAUSEA, AND IRRITATION OF NOSE, THROAT AND LUNGS.
SKIN:IRRITATING UPON REPEATED OR PROLONGED CONTACT. EYE:SLIGHTLY
IRRITATING TO EYES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. EYE:FLUSH WITH LARGE AMOUNT OF
WATER FOR AT LEAST 15 MINUTES. SEE MD IF IRRITATION PERSISTS.
SKIN:WASH AFFECTED SKIN AREAS WITH SOAP AND WATER. INGEST:IF
SWALLOWED DILUTE BY GIVING 2 GLASSES OF WATER TO DRINK. SEE MD.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.

Fire Fighting

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPATTER ABOVE 212F. POLYMER
FILM CAN BURN.

Accidental Release

Spill Release Procedures:KEEP SPECTATORS AWAY.FLOOR MAY BE SLIPPERY.
USE CARE TO AVOID FALLING. DIKE & CNTN SPILL W/INERT MATL (E.G.,
SAND, EARTH). TRANSFER LIQ TO CNTNRS FOR RECOVERY OR DISP & SOLID
DIKING MATL TO SEPARATE C NTNRS FOR DISP. KEEP SPILLS &
REMAINING(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING--PRODUCT MAY
COAGULATE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WHERE EXPOSURE
LIMITS ARE EXCEEDED.
Ventilation:MECHANICAL LOCAL EXHAUST VENTILATION AT POINT OF VAPOR OR
MIST RELEASE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
BP: 212F,100C (H2O). MP: 32.0F,0.0C (H2O). SPILL PROC:RUNOFFS OUT OF
MUNICIPAL SEWERS AND OPEN BODIES OF WATER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:SUPP DATA
Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Vapor Pres:17 @ 20C
Vapor Density:>1 (H2O)
Spec Gravity:1-1.2
Evaporation Rate & Reference:<1(BUTYL ACETATE=1)(H2O)
Solubility in Water:DILUTABLE
Appearance and Odor:MILKY WHITE LIQUID, SLIGHT AMMONICAL ODOR
Percent Volatiles by Volume:52-54

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:DECOMPOSITION IS DEPENDENT ON TIME &
TEMPERATURE. ONSET IF POLYMER DECOMPOSITION IS 350F, 177C.
Hazardous Decomposition Products:MONOMER VAPORS.

Disposal

Waste Disposal Methods:COAGULATE EMULSION BY STEPWISE ADDITION OF
FERRIC CHLORIDE. REMOVE CLEAR SUPERNATANT LIQUID & FLUSH TO
CHEMICAL SEWER. INCINERATE LIQUIDS & CONTAMINATED DIKING MATERIAL
AT PERMITTED FACILITY ACCORDING TO FEDERAL, STATE, AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.